Problem solving guide
General problems
Problem
The time display is
dark.
The Salt indicator
light starts flashing
The dishwasher
stops during a
programme.
The In-operation
indicator is flashing
quickly.
The buzzer sounds.
The Salt indicator
flashes when the
door is open.
Fault code F86
shows in the display.
54
Possible cause
The time display has
switched off automatically
to save energy (Standby
mode).
The salt reservoir has not
been closed properly.
The salt reservoir has not
been closed properly.
Remedy
Press any button (apart from
the Off button V).
The time display will light up.
Close the flap to the salt
reservoir properly.
– Switch the dishwasher off
with the Off button V.
– Close the flap to the salt
reservoir properly.
– Start the programme
again.