Miele G 1202 SC Operating Instructions Manual page 46

Problem solving guide
Problem
The Wash/Rinse,
Drying and End
indicator lights flash
simultaneously.
Fault code FXX shows
in the display.
The drain pump works
even when the door is
open.
46
Possible cause
There may be a
technical fault.
Fault F70:
The Waterproof System
has reacted.
Remedy
– Clean the water inlet filter
and clean the drain pump
and non-return flap as
described in "Maintenance".
If this does not resolve the
problem:
– switch the dishwasher off
with the On/Off button K.
After a few seconds:
– Switch the dishwasher back
on.
– Select the programme
required with the
programme selector button.
– Press the Start/Stop button.
If the programme sequence
indicator lights flash again,
there is a technical fault.
– Call the Service
Department.
– Close the stopcock.
– Call the Service
Department.