Table of Contents
Related Manuals for Miele G 1202 SC
Summary of Contents for Miele G 1202 SC
-
Page 1: Operating Instructions
Operating instructions for dishwashers To avoid the risk of accidents or en - GB damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. M.-Nr. -
Page 2: Table Of Contents
Contents Guide to the appliance ..........5 Appliance overview . - Page 3 Contents Operation ............31 Detergent .
- Page 4 Plumbing............62 The Miele waterproof anti-leak system ....... . . 62 Connection to the water supply .
-
Page 5: Guide To The Appliance
Guide to the appliance Appliance overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Child safety lock in door grip (not visible) d Middle spray arm j Rinse aid reservoir e Air inlet for drying k Dual compartment detergent... -
Page 6: Control Panel
Guide to the appliance Control panel a Programmes f Check/Refill indicators b Time display g Start/Stop button with indicator light c Extra options with indicator lights h Delay start button with indicator light d Programme sequence indicators i Extra options button e On/Off button K j Programme selector button... -
Page 7: Warning And Safety Instructions
Warning and Safety instructions Safety with children This appliance conforms to current This appliance is not a toy! To avoid safety requirements. Inappropriate the risk of injury, keep children well use can, however, lead to personal away and do not allow them to play in injury and damage to property. - Page 8 Warning and Safety instructions Technical safety Do not connect the dishwasher to the mains supply until it has been fully Before setting up the appliance, installed. check it for any externally visible damage. Under no circumstances Before connecting the appliance, should you use a damaged appliance.
- Page 9 If the connection cable is damaged where necessary. it must be replaced with a Miele cable – The stopcock has been turned off by a Miele approved service technician when the appliance is not used for a only.
-
Page 10: Correct Use
Warning and Safety instructions Installation Correct use The dishwasher must be installed Do not use solvents in the and connected in compliance with the dishwasher. Danger of explosion. installation diagram supplied. Do not inhale or ingest dishwasher The dishwasher must be correctly detergent. - Page 11 Warning and Safety instructions Accessories Inadvertently filling the salt reservoir with powder or liquid dishwasher Only use genuine Miele spare parts detergent will damage the water and accessories with this appliance. If softener. Make sure you have picked spare parts or accessories from other...
-
Page 12: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for disposal human health and to the environment. -
Page 13: Energy Saving Washing
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your appliance by following these tips: ^ If your household water system is suitable, this dishwasher can be connected to a hot water supply for further economies. -
Page 14: Before Using For The First Time
Before using for the first time To open the door Safety lock ^ Press the release catch inside the Use the safety lock to prevent children door grip upwards and pull the door opening the dishwasher door. open. ^ To lock the door, push the slide If the door is opened during operation underneath the door grip to the right. -
Page 15: Water Softener
Before using for the first time Water softener The dishwasher is programmed at the factory for a water hardness level In order to achieve good cleaning of 2.7 mmol/l (15 °d). results, the dishwasher needs to operate with soft water. Hard water If this setting corresponds to the results in the build-up of calcium hardness of your water you do not need... -
Page 16: To Programme The Water Hardness Level
Before using for the first time The characters "p 1 5" will flash one To programme the water hardness after the other in the display. level This means that the water hardness Each time a button is pressed, one of level has been set at 15 °d (2.7 mmol/l) the indicator lights will flash and light (factory setting). -
Page 17: To Call Up The Water Hardness Level In The Display
Before using for the first time To call up the water hardness level in the display °d mmol/l °f Value German displayed ^ Switch the dishwasher off with the scale On/Off button K. ^ Press the Start/Stop button in and whilst holding it in switch the dishwasher on using the On/Off button K. -
Page 18: Before Using The Appliance For The First Time You Require
Before using for the first time Miele branded products are available If the water in your area is very soft from the Miele Spare Parts and constantly lower than Department or via the internet at 0.7 mmol/l (4 °d - German scale) www.miele-shop.com. -
Page 19: Salt Indicator
Before using for the first time ^ Remove the lower basket and Salt indicator unscrew the salt reservoir cap. ^ Fill the salt reservoir with dishwasher salt when the salt indicator light Only open the salt reservoir when comes on. (If it comes on during a you want to fill it with dishwasher salt programme, wait until the end of the as water or salt solution will run out... -
Page 20: Rinse Aid
Before using for the first time Rinse aid If you only ever use combination Rinse aid is necessary to ensure water products containing rinse aid in your does not cling and leave marks on dishwasher, you do not need to add crockery during the drying phase and rinse aid. -
Page 21: Rinse Aid Indicator
Before using for the first time Rinse aid indicator When the light comes on the reservoir contains sufficient rinse aid for 2 - 3 programmes only. ^ Add rinse aid in plenty of time. If the "Combi tab" function has been selected the rinse aid indicator light will not come on (see "Additional functions, Extra options"). -
Page 22: Setting The Rinse Aid Dosage
Before using for the first time ^ Press the Delay start button three Setting the rinse aid dosage times. You can adjust the rinse aid dosage for best results. The "Delay start" indicator will flash briefly three times at intervals. The rinse aid dosage can be set from p 3 will flash in the Time display. -
Page 23: Loading The Dishwasher
Loading the dishwasher Note – Wide based items should be placed at an angle so that water can run off Remove coarse food residues from them freely. crockery. – The spray arms must not be blocked There is no need to rinse items under by items which are too tall or hang running water. -
Page 24: Items Not Suitable For Dishwashers
Loading the dishwasher Items not suitable for We recommend: dishwashers: – When purchasing new crockery and cutlery, make sure they are – Wooden cutlery and crockery or dishwasher-proof. items with wooden parts: these may discolour and fade. The glue used in –... -
Page 25: Upper Basket
Loading the dishwasher Upper basket Hinged cup rack For safety reasons, do not operate the dishwasher without the upper and lower baskets in place. ^ To make room for tall items, raise the rack upwards. ^ Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls, etc. -
Page 26: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, the following plate dimensions In order to gain more space for taller can be accommodated. pieces of crockery in the bottom or upper basket, the upper basket can be Dishwashers withcutlery tray adjusted on three levels with 2 cm between each level. -
Page 27: Lower Basket
Loading the dishwasher Lower basket Hinged spikes Both rows of spikes in the front section of the basket can be lowered to make more room for large items, e.g. pots, pans and dishes. ^ For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. - Page 28 Loading the dishwasher Vario insert To remove it: The vario insert is used for washing cups, glasses, plates, saucers, pots and pans. ^ Press the insert downwards a and press the catch inwards at the same time b. ^ The cup rack can be raised to make To replace it: more room for tall items.
-
Page 29: Bottle Holder (Depending On Model)
Loading the dishwasher Bottle holder (depending on model) The bottle holder can be used to wash narrow items, e.g. milk and baby bottles. ^ Place the bottle holder in the position shown in the bottom basket. If placed anywhere else, water will not be able to access the bottle properly, and cleaning results will be impaired. -
Page 30: Cutlery
Loading the dishwasher Cutlery Cutlery tray (depending on model) If spoon handles do not fit between the holders, then lay them the other way round. ^ Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. -
Page 31: Operation
Combi tabs are available as "3 in 1" or, Miele branded dishwasher cleaning when they also contain other components products are available from the Miele such as glass and stainless steel Spare Parts Department or via the protective additives and enhanced Internet at www.miele-shop.com. -
Page 32: Adding Detergent
Operation The flap is always open at the end of a Avoid inhalation of powder programme. detergents and do not ingest dishwasher detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. -
Page 33: Switching On
Operation Switching on Starting a programme ^ Make sure the spray arms are not ^ Select the programme required with obstructed. the programme selector button. ^ Close the door. The indicator light for the programme selected comes on. ^ Open the stopcock, if it is closed. The programme duration will appear in ^ Switch the dishwasher on with the hours and minutes in the Time display. -
Page 34: Time Display
Operation Time display Programme sequence indicators The duration of the programme selected appears in hours and minutes After a programme has been started in the Time display before the the current stage of the programme is programme begins. During the indicated by the programme sequence programme the time left until the end of indicator lights. -
Page 35: Unloading The Dishwasher
Operation Unloading the dishwasher Interrupting a programme Dishes tend to break and chip more A programme is interrupted as soon as easily when they are hot. the door is opened. Allow the dishes to cool until they are When the door is closed again, the comfortable enough to handle before programme will continue from the point unloading them. -
Page 36: Additional Functions
Additional functions Extra options Combi tabs The "Extras" button is used for selecting To ensure excellent results you can the "Turbo" and "Combi tabs" options. programme your dishwasher for the type of detergent you are using. ^ Switch the dishwasher on with the Use the Extras button to select between On/Off button K. -
Page 37: Delay Start
Additional functions ^ Switch the dishwasher on with the Delay start On/Off button K. The start time of a programme can be delayed, e.g. to benefit from economy The Start/Stop indicator light will flash. rates of electricity. A delay start time of ^ Select the programme required with between 30 minutes and 24 hours can the programme selector button. - Page 38 Additional functions The time starts counting down until the Starting a programme before the programme start time: in 1 hour steps Delay start period has elapsed: for delay start periods of over 10 hours, A programme can be started before the and in minutes for delay start periods of Delay start period has elapsed.
-
Page 39: Factory Default Setting
Additional functions Factory default setting The flashing sequence in the Time display shows whether a setting other If you have altered any settings from than the factory default setting has the factory default, you can re-set them been set. back to the factory default settings as –... -
Page 40: Adjust Sensor Wash
Additional functions Adjust Sensor wash The message flashing in the Time display shows whether the "Adjust You can adjust the Sensor wash Sensor wash" function is activated or programme so that it will remove deactivated. stubborn soiling in a lightly soiled load. –... -
Page 41: Cleaning And Care
The external surfaces of the surface to alter or discolour. dishwasher are susceptible to scratching. ^ Clean the front using a damp Miele Contact with unsuitable cleaning microfibre E-cloth or with a sponge and agents can alter or discolour the a solution of hot water and washing-up outer surfaces. -
Page 42: Cleaning The Filters In The Wash Cabinet
Cleaning and care Cleaning the filters in the wash cabinet The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. The dishwasher must not be used without all the filters in place. - Page 43 Cleaning and care ^ Replace the filter combination so that To clean the inside of the filter, the flap must be opened: it lies flat in the base of the wash cabinet. ^ Press catches a together in the ^ Then turn the handle clockwise, until direction of the arrows as shown, and open the filter b.
-
Page 44: Cleaning The Spray Arms
Cleaning and care ^ Remove the lower basket. Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). ^ Switch the dishwasher off. -
Page 45: Problem Solving Guide
With the aid of the following guide, faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting the Miele Service Department. Repairs should only be carried out by a suitably qualified and trained person in strict accordance with current local and national safety regulations. - Page 46 Problem solving guide Problem Possible cause Remedy The Wash/Rinse, There may be a – Clean the water inlet filter Drying and End technical fault. and clean the drain pump indicator lights flash and non-return flap as simultaneously. described in "Maintenance". Fault code FXX shows If this does not resolve the in the display.
-
Page 47: The Dishwasher Does Not Fill/Drain
Problem solving guide The dishwasher does not fill/drain. Problem Possible cause Remedy The Inlet/Drain The stopcock is Open the stopcock fully. check indicator closed. flashes. The dishwasher Before rectifying the problem stops during a you must: programme. – Switch the dishwasher off with the On/Off button K. -
Page 48: General Problems
Problem solving guide General problems Problem Possible cause Remedy The display is dark. The time display switches Press any button to come off automatically in out of Standby mode. Standby Mode to save energy. The dispenser was still Make sure the dispenser Detergent residue is left in the dispenser at the damp when detergent was... -
Page 49: Noises
Problem solving guide Noises Problem Possible cause Remedy Knocking noise in the A spray arm is knocking Interrupt the programme, wash cabinet. against an item in a and rearrange the items basket. which are obstructing the spray arm. Items of crockery are Interrupt the programme, Rattling noise in the wash cabinet. -
Page 50: Unsatisfactory Washing Result
Problem solving guide Unsatisfactory washing result Problem Possible cause Remedy The dishes are not The dishes were not loaded See notes in "Loading the clean. correctly. dishwasher" The programme was not Select a more intensive powerful enough. programme. See "Programme chart". There is some stubborn Use the "Adjust Sensor soiling although most of the... - Page 51 Problem solving guide Problem Possible cause Remedy Dishes, cutlery The amount of rinse aid Replenish the reservoir, and glasses are may be insufficient, or the increase the dosage or not dry or are rinse aid reservoir empty. change the brand of rinse aid. flecked.
- Page 52 Problem solving guide Problem Possible cause Remedy Glassware has a This may be caused by the Change your detergent. brown or blue tinge, detergent. and film cannot be wiped off. Glassware is dull and The glassware is not There is no remedy. discoloured;...
-
Page 53: Maintenance
^ Replace the filter and seal, making union. This filter is available from the Miele Spares Parts dept. sure they are sitting correctly. ^ Reconnect the inlet hose to the Cleaning the filter:... -
Page 54: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. ^ Disconnect the dishwasher from the mains supply. -
Page 55: After Sales Service
– Your Miele dealer, or technology. – the Miele Service Department (see Information regarding programme back cover for address). updates will be made known by the Miele Company as and when such Please note that telephone calls may developments become available. -
Page 56: Programme Chart
Programme chart Crockery Food deposits Action required This needs an Mixed, All normal adaptable programme... everyday crockery food deposits Shorter duration... Heat-sensitive glasses This needs a short and plastic programme... Fresh, easily removed food deposits This needs a gentle programme with glass care... - Page 57 Programme chart Programme Detergent Compartment I Compartment II 25 ml Sensor wash – 1 tab + Turbo option 25 ml Quick wash 40°C – 1 tab 25 ml Sensor wash gentle – 1 tab 25 ml Light soiling 50°C – 1 tab + Turbo option 25 ml...
- Page 58 Programme chart Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Sensor wash Variable programme sequence, sensor controlled adjustment according to the amount of crockery and level of food deposits If required 45-65 If required Quick wash 40 °C Sensor wash Variable programme sequence with glass care, gentle #...
- Page 59 Programme chart Consumption Duration Energy Water Cold Litres Cold water water water water connection connection connection connection (15 °C) (55 °C) (15 °C) (55 °C) h:min h:min 0.80-1.30 0.55-0.70 11-18 1:40-2:35 1:25-2:15 0.50 0.20 0:38 0:32 0.65-0.80 0.20-0.40 11-18 1:25-1:55 1:15-1:40 0.90 0.65...
-
Page 60: Optional Accessories
Optional accessories To make the most of your dishwasher Optional accessories for particular purposes are available from your Miele dealer, the Spare Parts Department or online at www.miele-shop.com (some may be supplied as standard, depending on model). If you would like to …... -
Page 61: Electrical Connection
Electrical connection Electrical connection U.K. Non-rewireable plugs BS 1363 The fuse cover must be refitted when All electrical work must be changing the fuse, and if the fuse cover carried out by a suitably qualified is lost, the plug must not be used until a and competent person, in suitable replacement is obtained. -
Page 62: Plumbing
30 and 1000 kPa (0.3 and 10 bar). Providing your dishwasher has been If the water pressure is too high, a installed correctly, the Miele waterproof pressure reducer valve must be anti-leak system will protect you from fitted. water damage throughout its lifetime. -
Page 63: Drainage
Plumbing Drainage Venting the drainage system – The appliance drainage system is If the on-site drain connection is fitted with a non-return valve, which situated lower than the guide path for prevents dirty water from flowing the bottom basket rollers in the open back into the dishwasher via the door, the drainage system must be drain hose. -
Page 64: Technical Data
Technical data Height freestanding 84.5 cm (adjustable +3.5 cm) Height built-in 80.5 cm (adjustable + 6.5 cm) Height of building-in recess Min. 80.5 cm (+ 6.5 cm) Width 44.8 cm Width of building-in 45 cm recess Depth: Freestanding 60 cm Built-in 57 cm Weight... - Page 68 Alteration rights reserved/ M.-Nr. 07 502 130 / 00 G1202 / 0509...