General Problems - Miele G 1222 Operating Instructions Manual

Table of Contents

Advertisement

General problems

Problem
Detergent residue is left
in the dispenser at the
end of a programme.
The detergent
dispenser lid cannot be
closed properly.
At the end of a
programme there is a
film of moisture on the
inside of the door and
the interior walls.
Water remains in the
wash cabinet at the end
of a programme.
Possible cause
The dispenser was still
damp when detergent was
added.
Clogged detergent
residue is blocking the
catch.
This is caused by the
drying system and does
not indicate a fault.
The filter combination in
the wash cabinet is
clogged.
The drain pump or
non-return valve may be
blocked.
The drain hose is kinked.
Problem solving guide
Remedy
Make sure the dispenser
is dry before adding
detergent.
Clean the detergent from
the catch.
The moisture will dissipate
after a short while.
Before rectifying the
problem you must:
– Switch the dishwasher
off with the On/Off
button s.
Clean the filter
combination. See
"Cleaning and care".
Clean the drain pump or
the non-return valve. See
"Maintenance".
Remove any kink from the
drain hose.
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 1222 scG 1232 scG 2222 scuG2222G1232G2232

Table of Contents