The Dishwasher Does Not Fill/Drain - Miele G 1173 Vi Operating Instructions Manual

The dishwasher does not fill/drain.

Problem
The dishwasher
stops working
shortly after the start
of the programme.
The buzzer sounds.
The Inlet/drain check
light 2/2 flashes
when the door is
opened.
The dishwasher
stops during a
programme.
The buzzer sounds.
The Inlet/drain check
light 2/2 flashes
when the door is
opened.
Possible cause
The stopcock is
closed.
Water intake is
restricted.
Water outlet is
restricted, water
remains in the
wash cabinet at
the end of a
programme.
Problem solving guide
Remedy
– Open the stopcock fully.
Before rectifying the problem you
must:
– Switch the dishwasher off with the
Off button V.
– Open the stopcock fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the intake is
lower than 30 kPa (0.3 bar).
Seek professional advice.
– Clean the filter combination. See
"Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve. See
"Maintenance".
– Remove any kink in the drain
hose.
45