Table of Contents
Advertisement
- While the camera is on, you can press the Power button
your camera OFF. You will see a "Goodbye" splash screen and then the camera will
power off completely.
Note: Your digital camera also has an Auto Power Off feature that will automatically
turn off your camera after a specific period of time that your camera is left idle. The Auto
Power Off settings can be set from the Auto Power Off settings menu.
Setting the Camera Language
1)
You will first be prompted to select a language for the camera. The Language selection
menu will appear. Select the language of your choice by pressing the UP and DOWN
direction control buttons. Then press the SET button to confirm the selection.
2)
After selecting a language, you will be asked if you would like to continue with the initial
camera setup. A message will appear: "Continue with Camera Setup?"
Select "Yes" to continue or "No" to exit the setup.
3)
Note: If you select "No" and decide to leave the camera setup, the camera will be set to its
default settings. These settings can be adjusted at any time manually through the menus in
the camera.
Setting the Date and Time
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as desired by pressing the RIGHT and LEFT buttons to choose the
specific setting and the UP and DOWN buttons to change each setting.
8
again at any point to turn
Advertisement
Table of Contents
