Table of Contents
Advertisement
Anti-Shake On - Ensure that the Anti-Shake option is set to „On‟. The Anti-Shake option is
„On‟ by default when you start using your camera and assists you in properly focusing the
image.
Distance from the camera – The subject‟s face must be no further than 8 to 9 feet (3.5
meters) from the camera and the face must cover at least 20% (1 / 5th) of the picture as
viewed on the LCD screen.
Facing the camera - The face of the subject(s) you are photographing must be facing the
camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears
around the subject‟s face.
Face Detect will not work with a side shot of the subject‟s head.
1)
Press the SET button to open the menus for the current mode.
2)
Press the LEFT or RIGHT direction control button to scroll and select the Face Detect menu.
3)
Press the UP or DOWN direction control button to scroll through the menu options.
4)
Press the SET button to select the desired option.
5)
A
selected option icon will appear on the selected item.
6)
Press the LEFT or RIGHT button to select the next menu item.
7)
Press the MODE button to exit the menu and return to your previous mode.
8)
An icon reflecting your selection will display on the LCD screen.
9)
Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Macro Menu
With the Macro feature you can capture images at close range (30 ~ 45 cm). To enable the Macro
„On‟. The flower icon
mode, select
mode is ON.
To return to the normal mode and disable the Macro mode, select
will appear on the LCD. When Macro mode is off, images can be captured from 1.5m - infinity.
Note:
The Macro mode must be turned OFF when you want to use the following features of your
will appear on the LCD and indicates that the Macro
22
„Off‟. The mountain icon
Advertisement
Table of Contents
