Table of Contents
Advertisement
When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP:
Powering the Camera ON
1)
Battery:
Make sure the battery is installed properly and has been fully charged.
First, open the battery compartment on the bottom of the camera.
Insert the battery in accordance with the polarity indicated.
Make sure to insert the lithium battery all the way into the battery compartment.
The battery latch should cover the battery if inserted correctly.
Then close the battery compartment cover.
To charge your battery, follow one of the steps below:
A. Charge the battery using the USB connection cable (included).
- Connect one end of the USB connection cable to the USB port on your camera.
- Connect the other end of the USB cable to the USB port on your computer.
5
Advertisement
Table of Contents
