Preparing Your Camera For Use; Install Lithium Battery - Vivitar ViviCam T328 User Manual

Preparing Your Camera for Use

Install lithium battery

Your digital camera needs a lithium Li-ion battery in order to operate. The battery is found separately in the
packaging. To install it correctly see the diagram below:
1. Slide and open the battery door on the right side of the camera.
2. Insert the battery correctly with the correct polarity facing up.
3. Use the battery clip found in the battery compartment to make sure that the battery is sitting firmly.
4. Close the battery door.
5. On powering on your camera the battery icon will appear on the bottom left of the LCD screen.
Full battery power
Note:
A "Low battery" message will flash on the LCD when the battery power is insufficient. Shortly
1.
thereafter your camera will power off.
2. Please remove your battery when you don‟t intend to use your camera for a long time.
Medium battery power
6
Low battery power