Vivitar ViviCam T028 User Manual

Vivitar ViviCam T028 User Manual

Sakar digital camera

Advertisement

ViviCam T028 Digital Camera

User Manual

© 2009-2011 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

Advertisement

Table of Contents
loading

Summary of Contents for Vivitar ViviCam T028

  • Page 1: User Manual

    ViviCam T028 Digital Camera User Manual © 2009-2011 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
  • Page 2: Table Of Contents

    Table of Contents Introduction ..........................2 What‟s Included ..........................2 Parts of the Camera ........................3 Initial Camera Setup ........................4 Main Camera Modes ........................7 Camera Technical Specifications ....................8 Computer System Requirements ....................9 Powering the Camera On/Off ..................... 10 Changing Camera Mode ......................
  • Page 3: Introduction

    Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera.
  • Page 4: Parts Of The Camera

    Parts of the Camera Power Button 12. LCD Screen Shutter Button 13. Digital Lens Flash / Charge LED 14. Flash Light Zoom Out 15. Microphone Zoom In 16. Speaker MODE button 17. MACRO Switch Flash / Up / Slide Show 18.
  • Page 5: Initial Camera Setup

    Initial Camera Setup Installing the Batteries Installing the Memory Card  SD Memory card (up to 32GB) needed for normal  Insert 2 AA (1.5V) batteries. Alkaline batteries recommended (not included). Turning On the Camera Using the Camera Selecting the modes Accessing the menu...
  • Page 6 When powering the camera ON for the first time the camera will take you through the INITIAL CAMERA SETUP. Powering the Camera ON Batteries Make sure the batteries have been inserted properly into your digital camera, according to the polarity shown inside the battery compartment. Use 2x AA (1.5v) batteries.
  • Page 7 Setting the Camera Language You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice by pressing the UP and DOWN direction control buttons. Then press the SET button to confirm the selection. After selecting a language, you will be asked if you would like to continue with the initial camera setup.
  • Page 8: Main Camera Modes

    Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON.
  • Page 9: Camera Technical Specifications

    Camera Technical Specifications CMOS 5 Megapixel Image Sensor 4000 x 3000 (12M) / 3648 x 2736 (10M) / 3264 x 2448 (8M) / Image Resolution 3648 x 2048 (7M HD) / 2592 x1944 (5M) / 2048 x 1536 (3M) / 1920 x 1080 (2M HD) / 640 x 480 (VGA) Video Resolution 640X480 pixels VGA (30 fps) / 320X240 pixels QVGA (30 fps)
  • Page 10: Computer System Requirements

    Computer System Requirements WINDOWS OS To be able to download photos and videos to your PC using the Vivitar Experience Image Manager Software, you will need the following minimum configuration:  Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 ...
  • Page 11: Powering The Camera On/Off

    Powering the Camera On/Off  Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use.  Make sure an SD card has been inserted into your camera. (SD card up to 32GB - SD Card not included) Please see Initial Camera Setup for more information.
  • Page 12: Changing Camera Mode

    Changing Camera Mode Your camera has three main modes: Photo Capture Mode - Use this mode to capture photos with your camera. Video Capture Mode - Use this mode to capture videos with your camera. Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have already taken with your camera.
  • Page 13: Navigating The Menus

    Navigating the Menus Each camera mode has a set of menus specific to that mode. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll between the various menus for the current mode.
  • Page 14: Photo Capture Mode

    Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camera. Taking a Picture While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.
  • Page 15 Taking a Self Portrait Picture You can also capture your photos using the flip screen which opens to 180 degrees. Before taking the photo, ensure that the Macro Switch on the side of the camera is up and in the ON position .
  • Page 16 Photo Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons: Button Function Scene Selection – Opens the Scene menu Left Flash Options – Toggles the Flash options appearing on the LCD Delete –...
  • Page 17 Flash Options There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in sequence. To change the Flash mode, press the UP Quick Function button until you arrive at your desired settings.
  • Page 18 Macro Switch MACRO ON: Your camera contains a Macro Switch that allows you to manually enable or disable the Macro mode on your camera. While using the Macro mode, you can capture images at close range (15 ~ 30 cm). To turn the Macro mode ON, slide the Macro Switch on the side of your camera UP to the flower icon ...
  • Page 19 Photo Capture Mode Menus The following are the menus that appear in your camera‟s Photo Capture Mode:...
  • Page 20 Scene Menu The Scene Menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the FLASH automatically (if it‟s ON) to optimize the picture quality. If however, you would like to override it and manually turn ON the flash –...
  • Page 21 Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection will display on the LCD screen. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
  • Page 22 Press the LEFT or RIGHT direction control buttons to scroll and select the Self-Timer menu. Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option. selected option icon will appear on the selected item.
  • Page 23 Face Detect Menu The Face Detect feature when set to „On‟ allows the camera to use a subject‟s face as the basis for balancing the other colors and focus in the camera‟s display. This feature is meant to ensure that the color and focus of your pictures will be consistently sharp and high-quality. Note: To properly use the Face Detect option, please ensure the following: ...
  • Page 24 White Balance Menu The White Balance feature allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment. Properly adjusting the White Balance setting to match your current environment will allow the camera to properly balance the colors in the images that are taken with your camera.
  • Page 25 Multi SnapShots Menu When enabled, the Multi SnapShots feature allows you to take six rapid snapshots in a row with a single click of the shutter button. This feature can be effective when trying to capture a particular moment in a sporting event or other scenes with quick movements.
  • Page 26 An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting should be adjusted when the environment is lighter or darker than normal.
  • Page 27 When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will optimize the image quality in environments with bright lighting. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the ISO menu.
  • Page 28 Press the LEFT or RIGHT button to select the next menu item. Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection will display on the LCD screen. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
  • Page 29 To Enable/Disable the Timestamp: Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu. Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option.
  • Page 30 Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option. selected option icon will appear on the selected item. Press the LEFT or RIGHT button to select the next menu item. Press the MODE button to exit the menu and return to your previous mode.
  • Page 31 Frequency Menu The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country‟s electric current, you may see waves on the images taken by your camera. 50Hz –...
  • Page 32 You will be asked to confirm the formatting of the memory card.  Select “No” to exit without formatting.  Select “Yes” and press the SET button to begin the format. The memory card will be completely formatted. Firmware (Factory Default Settings) Menu Use this menu to view the Firmware version on your camera or to reset your camera settings to the Factory Default Settings.
  • Page 33: Photo Playback Mode

    Photo Playback Mode The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with you camera.  When you first turn on the camera, the camera will be in Photo Capture mode by default. ...
  • Page 34 Photo Playback Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Function Displays the PREVIOUS image Left Views all the Photos as a Slide Show with 3, 5 or 10 second intervals.
  • Page 35 Photo Playback Mode Menus The following are the menus that appear in your camera‟s Photo Playback Mode: Delete Menu While in the Playback Mode, you can delete pictures from your camera through the Delete menu. View the photo you would like to delete. Press the SET button to open the menus for the Photo Playback mode.
  • Page 36 ViviLink for Photos Menu The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application. Press the SET button to open the menus for the current mode.
  • Page 37 Rotate Menu Use this menu to rotate the pictures that you‟ve taken with your camera. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Rotate menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 38 Protect/Lock Menu Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion or alteration being made to the files. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Protect/Lock menu.
  • Page 39 Slide Show Menu You can view a Slide Show of all the pictures taken with your camera by pressing the UP Quick Function button while in Playback mode. The Slide Show menu allows you to set the interval length of time that each picture will display during the slide show. Press the SET button to open the menus for the current mode.
  • Page 40: Video Capture Mode

    Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button once to access the Video Capture Mode. Taking a Video While in Video Capture Mode use the LCD display to direct the camera at the scene you would like to capture.
  • Page 41 Video Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Function Left Scene Selection - Opens the Scene menu Light Exposure – Opens the Light Exposure menu Delete - Opens the „Delete This Video‟ option and allows you Right to view and delete the last video taken as well as previously captured videos...
  • Page 42 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Capture Mode:...
  • Page 43 Scene Menu The Scene Menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 44 Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. Press the SET button to open the menus for the current mode.
  • Page 45 An icon reflecting your selection will display on the LCD screen. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Color Effect Menu You can choose to add a color effect to the images taken with your camera. Press the SET button to open the menus for the current mode.
  • Page 46 An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting should be adjusted when the environment is lighter or darker than normal.
  • Page 47 sensitivity to light however, may reduce the quality of the images that are taken. When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will optimize the image quality in environments with bright lighting. Press the SET button to open the menus for the current mode.
  • Page 48 Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option. selected option icon will appear on the selected item. Press the LEFT or RIGHT button to select the next menu item. Press the MODE button to exit the menu and return to your previous mode.
  • Page 49 Date/Time Menu When you capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable the timestamp for future images that will be taken with your camera.
  • Page 50 Auto Power Off Menu You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The designated time represents when your camera will automatically power off. When the camera sits idle for the designated period of time, the camera will shut off completely and will need to be turned on again with the power button before the next use.
  • Page 51 Press the MODE button to exit the menu and return to your previous mode. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Format Memory Card Menu You can use the Format Memory Card menu to delete all of the content that is currently on your camera‟s memory card.
  • Page 52 Press the SET button to reset the camera to the factory default settings. You will be asked to confirm the resetting to the factory default settings.  Select “No” to exit the menu and return to the previous mode without resetting to the default settings.
  • Page 53: Video Playback Mode

    Video Playback Mode The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with you camera.  When you first turn on the camera, the camera will be in Photo Capture mode by default. ...
  • Page 54 Press the SET button to enlarge the image full size. Once the selected video is full size you can play and view the video. Video Playback Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Function Displays the PREVIOUS image Left...
  • Page 55 Video Playback Mode Menus The following are the menus that appear in your camera‟s Video Playback Mode: Delete Menu While in the Playback Mode, you can delete videos from your camera through the Delete menu. View the video you would like to delete. Press the SET button to open the menus for the Video Playback mode.
  • Page 56 ViviLink Menu The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application. Press the SET button to open the menus for the current mode.
  • Page 57 menu. Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option. Press the MODE button to exit the menu and return to your previous mode. Any image that is locked will display a lock symbol on the LCD screen when viewing that image in the playback mode.
  • Page 58: Installing The Software

    Installing the Software You must be connected to the internet to install and run the Vivitar Experience Image Manager software. Insert the installation CD into your CD-ROM drive. The installation screen should automatically open. On PC: The Vivitar Experience Image Manager Installer window appears. If the window does not appear, open the application‟s CD/DVD drive and click on “Setup.exe”...
  • Page 59: Connecting The Camera To The Computer

    On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Install”.
  • Page 60: Getting Photos And Videos From Your Camera To Your Computer

    Getting Photos and Videos from your Camera to Your Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. Select the “Get Images” button from the Main menu. The “Get Images from device”...
  • Page 61: Get Started

     Edit images using automatic and manual tools  Use automatic “Geotagging” with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the Help file or click the “Take a Tour” button on the application’s Home page.
  • Page 62: Camera Maintenance

    Transferring Photos and Videos: MACINTOSH Use the USB cable that came with your camera to connect your camera to your computer. MSDC appears on the LCD. The camera‟s device icon appears on the desktop. Click on the device icon and open the DCIM folder and the folder inside to view the media files.
  • Page 63: Sakar Warranty Card

    Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase.
  • Page 64: Technical Support

    Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at support@vivitar.com and one of our technical support team members will answer your questions.

This manual is also suitable for:

Vivicam t126Vivicam f124

Table of Contents