Vivitar ViviCam 7020 User Manual page 11

Flash
Your camera has a built in flash function which enables you to take photos when the light condition is not
good.
1. Press the Up button.
The „Auto Flash‟ icon
2.
turned on and ready to use.
3. Press the Up button again to change from the Auto Flash to the Red Eye function.
The „Red Eye Reduction‟ icon
4.
Reduction function has been activated.
Press the Up button once more until you see the „Forced Flash‟ icon
5.
screen. This indicates that the flash is forced on.
To turn off the flash function, press the Up button again until the „No Flash‟ icon
6.
displayed on the LCD.
Note: A "Low Power" message will appear on the LCD screen, if you select the flash function when the
battery power is insufficient. To continue using the camera with the flash, please install new batteries.
will appear at the top of the LCD indicating that the Auto Flash is
will appear on the LCD indicating that the Red Eye
10
appear on the LCD
is