To Change A Programme; To Interrupt A Programme; Adding Or Removing Items - Miele T 270 C Operating Instructions Manual

Programmes cannot be changed after
the start button has been pressed. If
the programme selector is turned to a
different programme after a programme
has begun, this will not affect the
programme. The Anti-crease / Finish
indicator lamp will flash. The indicator
lamp will go out when the selector is
returned to its original position.
After a programme has started, not all
additional options can be switched on
or off (see section "How to dry
correctly").
^ Switch the machine off with the
I-On / 0-Off button.
To continue drying:
^ Switch the dryer on with the
I-On / 0-Off button.
The programme will continue, as long
as the cooling down phase has not
been reached.
^ Turn the programme selector to
Finish .
The programme has been
successfully cancelled when only the
Anti-crease/Finish indicator lamp is
on.
^ Turn the programme selector to the
required programme.
^ Switch additional options on or off as
required.
^ Press the Start button.
^ Press the Door button and open the
door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Items can now be added or removed
early.
To continue drying:
^ Close the door.
^ Switch additional options on or off as
required.
^ Press the Start button.
– The programme will continue.
– The time left shown in the display
may now vary from the actual drying
time.
19