Miele KM 420 Operating Instructions Manual page 24

a Sealing strip
b Hob
c Worktop
d Clamp
e Screw
^ Loosen the screws e.
^ Set the hob b in the cut-out and cen-
tre it.
^ Turn the clamps d outwards and
tighten the screws e.
^ Check that the hob unit b fits tightly
in the worktop.
24
Under no circumstances should
sealant find its way between the
frame of the top part of the hob and
the worktop.
This could cause difficulties if the
hob ever needs to be taken out for
servicing and possibly damage the
hob frame or the worktop.
The sealing strip under the edge of the
top part of the hob provides a sufficient
seal for the worktop.