Meridian G Series User Manual page 23

1 8
U s i n g t h e
Home
r a d i o t u n e r
This section gives information about scanning between radio
stations, selecting the wave band, and stepping between preset
stations.
Band/Frequency
FM
101.9
óòô
Radio
To select the radio
tuner
• Press Home to
display the source
options.
• Press Radio to select
the radio tuner.
Selecting a station
Classic
öõú
Scan down/up
To scan to the next
station
• Press V or A.
The tuner will scan
down or up in frequency
until it finds the next
station.
On FM, if the station
supports RDS the
display will show the
station name:
BBC R3
• Press Home when the Radio source is selected to display the
soft keys for selecting stations.
Station name (if available)
Band
Band Step Previous/Next
To change the wave To step between preset stations
band
• Press [ or ].
• Press Band.
Alternatively enter the preset station number using
the remote.
You can switch between
the following bands:
The display shows the frequency and preset station
number:
FM (VHF)
FM
101.3 MHz
or, if a name has been stored for the preset station,
MW (Medium Wave)
the preset station name:
MW
531 kHz
LW (Long Wave)
For information about defining preset stations see
Tuning manually and defining preset stations , page
LW
290 kHz
19.
In the USA
FM (VHF)
FM
101.3 MHz
AM
AM
531 kHz
Stereo and preset station
Stereo
àâä ÄÅÉ
99.3 MHz
2
Classic
1