Software Upgrade; Auto Upgrade; Searching For New Software; System Information And Reset Tv - Toshiba 32AV623D Owner's Manual

Software Upgrade

Auto Upgrade

When Auto Upgrade is set to On (default setting), the
television will automatically upgrade while in standby if new
software is available.
a
From the SETUP menu press
Software Upgrade and press
b
b
Press to select Auto Upgrade.
c
C c
Use or to select On or Off.

Searching for New Software

If preferred, software upgrades can be searched for manually
using Search for New Software.
a
In the Software Upgrade menu press
select Search for New Software.
b
Q
Press . The television will automatically start
searching for a software upgrade, the progress bar will
move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found the television will automatically
start downloading. If not, a screen will appear stating
that an upgrade is unavailable.
B b
or to select
Q
.
B b
or to
37
System Information and

Reset TV

System Information

This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
From the SETUP menu press
Information.
b
Q
Press to display the System Information.
System Information
2.1.26.0 Feb 19 2009 - 15:56:50 FW:13
WEAK
Ch22
Ch25
Ch35
Ch46
Reset TV
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a
In the SETUP menu press
highlighted.
b
Q
Press to select. A screen will appear warning that
all settings will be lost. Press
When the set powers back on, the Quick Setup screen
Q
will appear. Press
then auto tune. (See 'Quick Setup' section on page
11.)
CONTROLS AND FEATURES
B b
or to select System
TOSHIBA
2009
AVERAGE STRONG
Poor
Good
Good
Good
b
until Reset TV is
Q
to continue.
to continue, the television will