Table of Contents
Advertisement
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna UK Ltd., through its
Authorised Service Repairers will effect the repair or replacement
to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c)
The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd.
(f)
The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category............................Electric Rotary Lawnmower
Type(s) ............................MM340XC, MM360, MM360XC, MM420, MM420XC
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC (until 28.12.09), 2006/42/EC (from 29.12.09), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
product(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value a h given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Newton Aycliffe 25/11/2009
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
Keeper of technical documentation
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Power (kW)
Measured Sound Power L
Guaranteed Sound Power L
Level (dB(A))
Value
(m/s
2
)
a h
Uncertainty K of
a h
Weight (Kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2008 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered
5100693-02
Guarantee & Guarantee Policy
EC Declaration of Conformity
WA
(dB(A))
WA
(dB(A))
WA
(m/s
2
)
Failures not covered by guarantee
* Replacing worn or damaged blades.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in this Operator's
Manual.
* Machines used for hire are not covered by this
guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular
maintenance and are, therefore not normally subject
to a valid warranty claim: Blades, Electric Mains cable
* Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly
or indirectly by the fitting of replacement parts or
additional parts that are not either manufactured or
approved by Husqvarna UK Ltd., or by the machine
having been modified in any way.
at the operator's position, recorded on a sample of the above
pA
& Guaranteed Sound Power L
Leatherhead, Surrey
KT22 7SB, England
MM340XC
MM360
34
36
3,850
3,850
1.5
1.5
93
93
96
96
80.4
80.4
1.56
1.56
1.5
1.5
12.8
12.4
trademarks of Flymo S.A.
Husqvarna AB
561 82
Huskvarna
Sweden
values are according to the tabulated
WA
MM360XC
MM420
36
42
3,600
3,850
1.5
1.7
93
95
96
96
84.9
80.4
1.56
1.53
1.5
1.5
12.8
13.1
MM420XC
42
3,600
1.7
95
96
84.9
1.53
1.5
14.7
Hide quick links:
Advertisement
Table of Contents
