Using A Dynamic Ip (Pppoe Connection); Configuring Audio Output Via An Hdmi Device - Zotac ZBOX ID82 User Manual

Using a dynamic IP (PPPoE connection)

1. Repeat Step 1-3 in the previous section.
2. Select Obtain an IP address automatically and click OK.
3. Click Create a new connection to start the NEW Connection Wizard.
4. Click Next.
5. Select Connect to the Internet and click Next.
6. Select Set up my connec-
tion manually.
7. Select your connection
type and click Next.
8. Enter your ISP Name and
click Next.
9. Enter your User name and
Password. Click Next.
10. Click Finish to finish the
configuration.
11. Enter your user name and
password. Click
Connect to connect to the internet.
Contact your internet Service Provider (ISP) if you have problems connecting to

the network.

Configuring audio output via an HDMI device

Follow the steps below to enable audio output via HDMI when connecting the
ZOTAC ZBOX to a TV or receiver via HDMI.
1. Access the Sound settings via the system
Control Panel.
2. Under Playback devices, click the display
device item "Philips 234EL" (the device
name depends on your display brand and
model).
3. Click the "Set Default" in the lower right
hand corner.
4. Click "OK" to exit the setup.
ZOTAC ZBOX
23