Setting Up Your Zotac Zbox - Zotac ZBOX ID82 User Manual

ZOTAC ZBOX

Setting up your ZOTAC ZBOX

You need to connect peripherals before using your ZOTAC ZBOX.
5
1. Connecting a WiFi antenna module
Connect a WiFi antenna module to the WiFi antenna connector.
Note: When using the ZOTAC ZBOX, please be sure that the WiFi antenna
module is connected to the WiFi antenna connector for the better performance
of the WiFi/Bluetooth.
2. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to
the USB 3.0 port on the system rear panel.
3. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other End to a hub or switch.
4. Connecting to USB 2.0 devices
Connect USB devices like wired/wireless keyboards (varying with areas), mouse
devices and printers to the USB ports on the system rear panel.
16
1
2
3
4
5
6
7
8