Table of Contents
Advertisement
Rear view
1
Refer to the diagram below to identify the components on this side of the system.
1. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices
2. Ethernet port
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connection to a
local area network (LAN) with speeds of 10/100/1000Mbps.
3. Combo eSATA 3.0 Gb/s / USB 2.0 port
The combo eSATA 3.0 Gb/s / USB 2.0 port is compatible with eSATA devices such
as external hard drives, Blu-ray drives, and USB 2.0 devices.
4. Single-link DVI-I output
The single-link DVI-I output supports digital displays with resolutions up to
1920x1200 and connection to analog VGA monitors with the included adapter (up
to 2560x1600).
5. HDMI output
The HDMI (High Definition Multimedia Interface) output supports Full HD 1080p
displays such as an HDTV or monitor.
6. Optical SPDIF output
The optical SPDIF output enables connecting the ZOTAC ZBOX Blu-ray to digital
audio receivers and speakers for crystal clear digital audio and surround sound
from compatible soundtracks.
7. Safety lock
Connects to compatible Kensington Safety Locks.
8. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the mini-PC. To prevent damage
to the mini-PC, always use the supplied power adapter.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it
away from your body.
Note 2: Due to the special design for easy upgrade, some connectors are placed upside down.
3
4
2
5
6
ZOTAC ZBOX Blu-ray
7
8
7
Advertisement
Table of Contents
