Emc Conformity Standards; Ped (Pressure Equipment Directive) - YOKOGAWA Dpharp vigilantplant EJA Series Manual

(4) Operation
WARNING
• OPEN CIRCUIT BEFORE REMOVING COVER.
INSTALL IN ACCORDANCE WITH THIS USER'S
MANUAL
• Take care not to generate mechanical sparking
when access to the instrument and peripheral
devices in hazardous locations.
(5) Maintenance and Repair
WARNING
The instrument modification or parts replacement by
other than authorized Representative of Yokogawa
Electric Corporation is prohibited and will void the
certification.
(6) Name Plate
Name plate
Tag plate for flameproof type
Tag plate for intrinsically safe type
Tag plate for type n protection
Tag plate for flameproof, intrinsically safe type,
type n protection, and Dust
D
MODEL: Specified model code.
STYLE: Style code.
SUFFIX: Specified suffix code.
SUPPLY: Supply voltage.
OUTPUT: Output signal.
MWP: Maximum working pressure.
CAL RNG: Specified calibration range.
DISP MODE: Specified display mode.
OUTPUT MODE: Specified output mode.
NO.: Serial number and year of production*
*1:
*2:
2-9-32 Nakacho, Musashino-shi, Tokyo Japan
2.5
EN61326, AS/NZS CISPR11
: Refer to USER'S MANUAL
2.6
(1) General
• EJA series of pressure transmitters are categorized
F0212.ai
• EJA130A, EJA440A, EJA510A, and EJA530A can
<2. Handling Cautions>
TOKYO 180-8750 JAPAN:
The manufacturer name and the address*
The third figure from the last shows the last one figure of
the year of production. For example, the production year
of the product engraved in "NO." column on the name
plate as follows is 2001.
12A819857
The year 2001
"180-8750" is a zip code which represents the following
address.

EMC Conformity Standards

CAUTION
This instrument is a Class A product, and it is designed
for use in the industrial environment. Please use this
instrument in the industrial environment only.
NOTE
YOKOGAWA recommends customer to apply the
Metal Conduit Wiring or to use the twisted pair Shield
Cable for signal wiring to conform the requirement
of EMC Regulation, when customer installs the EJA
Series Transmitters to the plant.
PED (Pressure Equipment
Directive)
as pressure accessories under the vessel section
of this directive 97/23/EC, which corresponds to
Article 3, Paragraph 3 of PED, denoted as Sound
Engineering Practice (SEP).
be used above 200 bar and therefore considered as
a part of a pressure retaining vessel where category
lll, Module H applies. These models with option code
/PE3 conform to that category.
13
1 .
2 .
132
IM 01C22A01-01E
2