About The Package; Package Contents; Contents Of The Cd-Roms; Contents Of Manuals - Yamaha PM1D v.2 Installation Manual

About the Package

Package Contents

The package contains the following items. Please confirm that all
items are included before you start using the software.
• One CD-ROM
• Three manuals

Contents of the CD-ROMs

• Firmware and CS1D screen software updater
This is an application and data for updating the firmware of each
component and the CS1D screen software to V2.
• Installer (System Software Installer)
This is an installer for authorizing the software that was updated
to V2.
• PM1D Manager
PM1D Manager is an application program that provides an
environment equivalent to the CS1D on your computer. For
details on installing and using PM1D manager, refer to the
PM1D Manager owner's manual.
• Yamaha USB-MIDI Driver
This driver enables the computer and the CS1D to communicate
with each other via their USB ports. This is not used for
updating the system software.
See the PM1D Manager Owner's Manual for more information
on installing drivers.
• Owner's Manual (PDF format)
These provide the same content as the paper manuals, in PDF
format.
NOTE: Adobe Reader (available free of charge) must be installed in
your computer in order to view the PDF manual. If you don't have
Adobe Reader, use the weblink given below to open the Adobe
Corporation website, and download Adobe Reader.
http://www.adobe.com

Contents of Manuals

System Software Installation Guide (this guide)
First, check the package contents, system requirements, and
procedure for installing the system software.
PM1D Version 2 Supplementary Manual
This explains the changes in system software version 2.
PM1D Manager Owner's Manual
This explains installation and use of PM1D Manager.
2
Before you install the license for the system software, you must
use the following procedure to update all software to V2.

Before you use the PM1D system

PM1D system contains software that allows the CS1D/DSP1D(-
EX)/AI8/AO8/DIO8 (subsequently referred to as "the
components") to operate independently. Thus, all software must
be updated to the same version to ensure consistency. If you fail to
perform this step, the CS1D's version checking function will
detect the inconsistency, and the system will not start up correctly.
Since it is possible that the various components are not running
the same software version (due to different dates of purchase, or
any other reason), you must use the included CD-ROM to update
the entire system before using the system for the first time.
Once you have updated the entire system to the same version,
subsequent updates are not necessary. However if you add a new
unit, or use a new CD-ROM to update, you must once again
update the entire system.

System Requirements

The following system is required in order to perform the update.
• An IBM PC/AT compatible computer with a Pentium II
NOTE:
• Depending on your hardware or OS, system requirements may be
• If you are using a notebook computer, system requirements may
• For the latest version of the software and details on operating
PM1D V2 System Software Installation Guide
Updating the firmware
and CS1D screen software
• You must use the included CD-ROM to update the
entire system. After updating the system, you must
execute INITIALIZE ALL MEMORIES. If you fail to
perform the update or initialization, operation is not
guaranteed. For details on INITIALIZE ALL
MEMORIES, refer to "Initializing memories" within the
Reference Manual (Software).
• If your CS1D was shipped from the factory with the V2
system software, it will not have a product ID. Please
note that in this case, if you change from V2 to an earlier
version, you won't be able to return to V2 (i.e., you won't
be able to install the V2 license). If you are unable to
return to V2, you will have to purchase a PM1DV2K
upgrade kit.
233 MHz processor and 64 MB of memory or better.
(Pentium II 350 MHz and 128 MB of memory is
recommended.)
greater than listed above.
be greater than listed above as the minimum. Also,
communication may become unstable due to the power
management settings in the Windows Control Panel, or due to
power management settings specific to notebook CPUs (e.g.,
SpeedStep (Intel Corporation), PowerNow! (AMD Corporation),
or LongRun (Transmeta Corporation)). Please disable these
power management settings and use your computer with its power
supply adaptor connected.
requirements, please refer to the following URL.
http://www.yamahaproaudio.com/