Macintosh Installation; Adobe Reader; Oms (Open Music System) - Yamaha Studio Manager V2 Installation Manual

Macintosh Installation

Adobe Reader

NOTE: Adobe Reader is not required if you're using Mac OS X.
Adobe Reader (available free of charge) must be installed on
your computer in order to view the PDF format manual for
Card Filer. If you don't have Adobe Reader, access the Adobe
Corporation website at the URL shown below, and download
Adobe Reader.
http://www.adobe.com

OMS (Open Music System)

NOTE: If you are planning to use only Studio Manager, you do not
need to install OMS. Install OMS to use MIDI applications other
than Studio Manager.
OMS enables you to use MIDI applications on a Macintosh
computer with Mac OS 9 or earlier. If you already have OMS
2.3.3 or later installed, skip this section.
1
Start your Macintosh, and then insert the included
CD-ROM into your computer's CD-ROM drive.
2
Double-click the "Mac OS 9" folder on the CD-
ROM.
3
Double-click the "OMS_" folder on the CD-ROM.
4
Double-click "Install OMS 2.3.8."
5
Follow the on-screen instructions to install the
software.
6
When the installation is complete, click [Restart].
NOTE: Once the installation is complete, you may receive an
error message warning that the installer did not quit. In this
case, choose [Quit] from the [File] menu to quit the installer,
then restart your computer.
7
Copy the "OMS_2.3_Mac.pdf" from the "OMS_"
folder on the CD-ROM to the "Opcode:OMS
Applications" folder on your hard disk.
This file contains information on using and configuring
OMS.
Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)
USB MIDI Driver
If you're connecting your Yamaha mixing console to a USB port
on your computer, you'll need to install the Yamaha USB driver.
If you already have this driver installed, skip this section.
Computer
Studio
Manager
USB cable
Driver
The procedure for installing the USB driver varies with different
Macintosh OS versions.
• Mac OS 8.6 – 9.2.2: See below.
• Mac OS X: See page 10.
Mac OS 8.6 – 9.2.2
NOTE: This USB MIDI driver is required for MIDI
applications other than Studio Manager. Studio Manager
supports Mac OS X 10.2 or later, but not earlier. To use Studio
Manager, install the USB MIDI driver for Mac OS X.
1
Double-click the "Mac OS 9" folder on the CD-
ROM.
2
Double-click the "USBdrv_" folder on the
CD-ROM.
3
Double-click "Install USB MIDI Driver."
The "Install USB MIDI Driver" window appears, as shown
below.
Normally there's no need to set the Install Location,
because the startup disk is selected by default. To select
another disk, click the [Switch Disk] button.
Although you can select a destination folder from the
pop-up menu, the files are installed in the specified disk's
System Folder regardless, so you can ignore that option.
4
Click [Install], and follow the on-screen
instructions to install the software.
5
When the installation is complete, click [Restart].
Yamaha
mixing console
9