Cd Synchronized Recording - Yamaha CDX-397MK2 Owner's Manual

CD SYNCHRONIZED RECORDING

This unit can automatically synchronize a tape deck recording with CD play. With this function, you can record a CD on tape
easily and precisely.
This recording method requires a Yamaha tape deck compatible with this function. (Refer to the tape deck operation manual to
find out whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can simultaneously receive the signals from the
remote control of this unit.
1
1
3
5
9
DIMMER
1
Press ) ) ) ) ) OPEN/CLOSE to open the disc tray, and
load a disc.
OPEN/CLOSE
2
Load a tape on the tape deck.
* The peak level search function of this unit is useful for
adjusting recording level on the tape deck. (For
details, refer to page 20.)
3
Press SYNCHRO.
This unit enters into the pause mode, and the tape
deck enters into the REC/PAUSE mode.
* In this state, the time display on this unit blinks on and
off.
If necessary, select a desired track by pressing a
numeric button or
or
5
OPEN/CLOSE
2 3 4
6 7 8
0 INDEX
RANDOM
SYNCHRO
/ .
DIMMER RANDOM
REPEAT A–B PROGRAM
3
SYNCHRO TAPE PEAK
SEARCH
3
TIME/INFO
4
Press .
Both CD playback and tape deck recording start.
* CD playback starts shortly after starting the recording.
5
If you want to stop recording temporarily and restart
recording from a desired track, stop this unit by
pressing , and the tape deck as well, then follow
steps 3 – 4 again.
To cancel synchronized CD-tape recording
function
Press .
Notes
To finish or stop the recording, make proper operations on the
tape deck. (For details, refer to the owner's manual of the tape
deck.)
Programmed sequence of tracks can also be recorded with this
function instead of recording an entire disc. (For details, refer
to pages 14 – 15.)
This function can also be used together with the automatic
tape-programming function. (For details, refer to pages
16 – 17.)
CLEAR
SPACE
4
5
21
En