Cd Synchronized Recording - Yamaha CDC-575 Owner's Manual

CD SYNCHRONIZED RECORDING

Using a compatible YAMAHA tape deck, you can synchronize the tape deck to start recording automatically when a CD starts
playing. With this function, you can record a CD on tape more easily and precisely. (Refer to the tape deck's operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit's
remote control transmitter at the same time.
CDC-675
3
SYNCHRO
1
4
4
7
DISC SCAN
1
DISC SKIP
–
OUTPUT LEVEL
STOP
1
Select a disc.
2
Load a tape on the tape deck.
* CDC-675 only
The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
(Refer to page 21.)
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit blinks.
TEXT/ OPEN/
DIMMER TIME CLOSE
TAPE CLEAR PROG
2 3
INDEX
+
5 6 I0
8 9 0
MODE REPEAT RANDOM
SEARCH
4
+
SKIP
PAUSE PLAY 5
DISC SKIP
SYNCHRO
CDC-575
3
SYNCHRO
1
4
4
7
DISC SCAN
1
DISC SKIP
STOP
4
If desired, select the track to be recorded first.
5
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
Notes
To finish or stop recording, press the "STOP" button on the
tape deck.
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
pages 14–15 for the programming procedure.)
CDC-675 only
This function can also be used together with the automatic
tape-programming function. (Refer to pages 18–20.)
TEXT/ OPEN/
DIMMER TIME CLOSE
CLEAR PROG
2 3
INDEX
+
5 6 I0
8 9 0
MODE REPEAT RANDOM
4
SEARCH
SKIP
PAUSE PLAY 5
6
or
SKIP
PLAY
17