Yamaha DME 32 Owner's Manual page 6

6
GEQ
The three stereo GEQ components are shown below.
Each GEQ control window consists of five sections: INPUT, HPF, LPF, EQ bands, and
OUTPUT. The center frequency of each band is shown above each slider. Since the only
difference between all the GEQ components is the number of bands, only the stereo 15
BAND GEQ control window is shown here.
The parameter ranges for the stereo GEQ components are as follows.
Section
ON/OFF
INPUT
HPF
LPF
EQ band Gain
OUTPUT LEVEL
MUTE
DME32—Owner's Manual Supplement
Parameter Range
ON/OFF
LEVEL Mute to 0.0 dB
PHASE NOR/REV
Frequency 20.0 Hz–20.0 kHz
ON ON/OFF
Frequency 20.0 Hz–20.0 kHz
ON ON/OFF
–15 dB to +15 dB
Mute to 0.0 dB
ON/OFF
Description
Turns the component on and off
Adjusts the input signal level
Inverts the input signal
Adjusts the HPF cutoff frequency
Turns the HPF on or off
Adjusts the LPF cutoff frequency
Turns the LPF on or off
Adjusts the gain of each band
Adjusts the output signal level
Mutes the output