Yamaha DME 32 Owner's Manual page 14

Digital mixing engine
Hide thumbs Also See for DME 32:
Table of Contents

Advertisement

14
turned on are affected. The Fader component Fade buttons, which are new to Version
1.5, are shown below on the 8-channel Fader component's control window.
Click Apply to apply your settings and leave the Fade Time window open, click
5
OK to apply your settings and close the window, or click Cancel to leave the
settings unchanged and close the window.
Using the Apply button instead of the OK button is convenient when you want to set
the Fade time for several scenes without having to keep opening and closing the Fade
Time dialog box.
Store the Fade Time setting in a scene by storing the scene.
6
Compile and transfer the configuration to the DME32.
7
See the DME32 Owner's Manual for information on compiling and transferring config-
urations to the DME32.
Fade Time Notes
If you edit a parameter using DME Manager, the DME32 front panel, MIDI, or the GPI
interface while a fade is in progress, the fade will not be applied to that parameter.
When the Fade Time is set to Selected faders, if you deselect a fader while a fade is in
progress, the fade will not be applied to that fader.
Parameters to which the fade does not apply, such as frequency parameters, can be
edited as normal while a fade is in progress.
If a configuration is loaded or transferred while a fade is in progress, the fade is canceled
and the faders move to their new values.
DME32—Owner's Manual Supplement

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dme 32 version 1.5

Table of Contents