Setting The Level (Manual); Setting The Temperature Span (Manual) - Fluke Thermal Imagers Ti10 User Manual

Level

Setting the Level (Manual)

When put into manual ranging, the level setting adjusts the thermal span within
the total temperature range of the Imager. See Figure 1. To set the level:
1. After entering the manual range mode (See the "Setting the Range"
section above), press the softkey labeled Level.
Press the softkey labeled Up to move the temperature span to higher
2.
temperatures or Down to move the span to lower temperatures.
3. Press the softkey labeled Done to set the Imager's range level.
The scale along the right side of the display indicates the range.

Setting the Temperature Span (Manual)

When put into manual ranging, the span setting adjusts the palette over a
temperature range within the total range of the Imager. See Figure 1. To adjust
the temperature span:
1. After entering the manual range mode (See the "Setting the Range"
section above), press the softkey labeled Span.
Figure 1. Range and Span Settings
Thermal Imagers
Adjusting the Thermal Image
Total Imager Range
Span
exj02.eps
9