Teledyne 316RA Instruction Manual page 2

Copyright © 1993 Teledyne Analytical Instruments
All Rights Reserved. No part of this manual may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any other language or com-
puter language in whole or in part, in any form or by any means, whether it be elec-
tronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written
consent of Teledyne Analytical Instruments, 16830 Chestnut Street, City of Industry, CA
91749-1580.
Warranty
This equipment is sold subject to the mutual agreement that it is warranted by us
free from defects of material and of construction, and that our liability shall be limited to
replacing or repairing at our factory (without charge, except for transportation), or at
customer plant at our option, any material or construction in which defects become
apparent within one year from the date of shipment, except in cases where quotations or
acknowledgements provide for a shorter period. The Micro-Fuel Cell warranty period
begins on the date of shipment from Teledyne. Components manufactured by others bear
the warranty of their manufacturer. This warranty does not cover defects caused by wear,
accident, misuse, neglect or repairs other than those performed by Teledyne or an
authorized service center. We assume no liability for direct or indirect damages of any
kind and the purchaser by the acceptance of the equipment will assume all liability for
any damage which may result from its use or misuse.
We reserve the right to employ any suitable material in the manufacture of our
apparatus, and to make any alterations in the dimensions, shape or weight of any parts,
in so far as such alterations do not adversely affect our warranty.
Important Notice
This instrument is intended to be used as a tool to gather valuable data. The
information provided by the instrument may assist the user in eliminating potential
hazards caused by the process that the instrument is intended to monitor; however, it is
essential that all personnel involved in the use of the instrument or its interface with
the process being measured be properly trained in the process itself, as well as all
instrumentation related to it.
The safety of personnel is ultimately the responsibility of those who control
process conditions. While this instrument may be able to provide early warning of
imminent danger, it has no control over process conditions, and can be misused. In
particular, any alarm or control system installed must be tested and understood, both as
to how they operate and as to how they can be defeated. Any safeguards required such as
locks, labels, or redundancy must be provided by the user or specifically requested of
Teledyne when the order is placed.
The purchaser must be aware of the hazardous conditions inherent in the
process(es) he uses. He is responsible for training his personnel, for providing hazard
warning methods and instrumentation per the appropriate standards, and for ensuring
that hazard warning devices and instrumentation are maintained and operated properly.
TAI, the manufacturer of this instrument, cannot accept responsibility for condi-
tions beyond its knowledge and control. No statement expressed or implied by this
document or any information disseminated by the manufacturer or his agents is to
be construed as a warranty of adequate safety control under the user's process
conditions.
TELEDYNE ANALYTICAL INSTRUMENTS