Table of Contents
Advertisement
3.5.3 Voyage Settings (User Password Protected)
Note:
The default User Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Voyage Related Data for initial NAUTICAST2 operation, it is advised to configure the
User Password in:
Menu 5:
Configuration
Submenu 1: Change User Password
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
Dynamic Keys: Voyage Settings (User Password Protected)
[M5]
[Enter]
After the Voyage Settings have been input and saved, this screen appears.
[Exit] takes the user back to the Main Menu.
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
User Manual
o
o
31' E
0
24' |1>0.10|2>1.30|3>1.80nm
User password protected!
Please enter user password:
| Enter
|
|
Confirm Password
Input
o
o
30' E
0
24' |1>0.10|2>1.30|3>1.80nm
Data saved.
|
|
|
| Exit
Return to Vessel
[M8]
[Exit]
Listing
| <-Exit
45
Y1-03-0218 Rev A
Advertisement
Table of Contents
