Fisher-Price BO639 Instruction Sheet page 10

Swing and Mobile Use
Adjust Swing Motion
Seat Tube
TURN
4
Cradle
You can adjust the motion of the swing: side to side or
front to back.
• Press the seat tube button to unlock the seat tube.
• Rotate the seat tube to the desired position.
Adjust Seat to Recline or Upright
5
Press Seat Position Buttons
You can adjust the seat to two different positions:
Recline or Upright.
• From behind the seat, press both seat position buttons.
• Lift the seat back until the buttons "snap" into the
upright position.
• Push the seat back down until the buttons "snap" into
the recline position.
PRESS
Seat Tube Button
Swing
Upright
Recline
Front Edge
of Seat
Using the Tray
Tab
Slot
6
• Fit the tabs on the tray into the slots in the sides of the seat.
• To remove the tray, pull the tab out on one side of tray
and lift.
Storage
Button
Lower Leg
Button
7
• Press the buttons on the back of the motorized frame while
pushing the legs inward.
• Lean the swing frame against a wall for storage.
IMPORTANT! Remove the batteries for long-term storage.
Hint: The legs may be disassembled for long-term storage.
Press the button on each lower leg and remove them from the
upper legs.
10
Tray
Button
Lower Leg
Button