Caution And Care - Mitsubishi HS-7168E Installation And Operation Manual

CAUTION AND CARE

CONDENSATION IS THE ENEMY OF VIDEO RECORDERS
2 WHAT IS CONDENSATION?
1. When a very cold drink is poured into a glass, the water droplets which form on the outer surface of the glass are an example of
condensation.
2. If the VCR is exposed to a rapid increase in temperature (such as warming a cold room or after transporting it from a cold location
to a warm one) condensation may form on the tape transport mechanism inside the VCR. To prevent damage to the VCR or tapes,
plug the VCR into the mains outlet and turn the power on for about 2 hours. Do not use the VCR for playback or record during this
time.
2 CONDENSATION IS LIKELY TO OCCUR WHEN:
1. The VCR is moved inside from outdoors, or from a cold room to a warm one.
2. A cold room is heated quickly.
3. Humidity is high.
N
• Avoid using the VCR where cold air (e.g., from an air conditioner) will blow directly on it.
• Never place anything containing water on top of the VCR, e.g., vases, cups, etc.
HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE VCR (E.G., TV)
UNPLUGGING THE MAINS LEAD
Whenever unplugging the mains leads, be sure to switch off the
mains outlet first. Then unplug the lead by gripping the plug (not
the lead) and carefully remove the plug from the mains outlet.
NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE VCR
Touching the inside of the cabinet or inserting foreign objects of
any kind not only creates a safety hazard but can also cause
extensive damage.
PROTECT THE MAINS LEAD
Damage to the mains lead may cause fire or shock hazard.
UNPLUG THE MAINS LEAD DURING A LONG ABSENCE
During a long absence, turn off the power and switch off the
mains outlet before unplugging the mains lead.
MAINTAIN GOOD VENTILATION
Do not obstruct the many ventilation holes on the VCR. For
maximum ventilation, place the unit on a hard level surface only,
and ensure it is not covered during use. Heavy objects should
never be placed on the VCR.
WHEN NOT IN USE
When you finish operating the VCR always unload the cassette
and turn OFF the VCR POWER.
For HS-7168E(B) and HS-7168EM(B)
2 MAINS LEAD CONNECTION
The mains lead on this VCR is fitted with a non-rewireable
mains plug, incorporating a 5A fuse. If you need to replace
the fuse, use a 5A fuse approved by BSI or ASTA to BS 1362,
ensuring you refit the fuse cover. If the mains plug is not
suitable for the sockets in your home, and you require to
remove the plug, remove the fuse, cut off the plug then dis-
pose of the plug immediately, to avoid a possible electric
shock hazard. To refit a new plug, follow these instructions;
Green-and-yellow: Earth,
Blue: Neutral,
Brown: Live
As the colours in the mains lead of this VCR may not corre-
spond with the coloured markings identifying the terminals
in your plug, proceed as follows.
• The wire which is coloured green-and-yellow must be con-
nected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol » or coloured green
or green-and-yellow.
• The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
• The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
CABINET CARE
Never use petroleum-based cleaners. Clean with a soft cloth
moistened with soap and water and wipe dry. PVC cables or
leads should not be left in contact with the cabinet surface for
long periods.
INSTALLATION LOCATION
For optimum performance and reliability, install the VCR in a
location that is:
1. Well ventilated, out of direct sunlight and away from direct
heat.
2. A solid vibration-free surface.
3. Free from high humidity, excessive dust and away from mag-
netic fields.
N
• Never move the VCR without first removing the tape.
CARE OF VIDEO CASSETTE TAPES
• Avoid violent vibration or shock.
• Do not place near a strong magnetic field (e.g., a motor, trans-
former or magnet).
• Never place or store in direct sunlight.
• Avoid dusty places.
• Place the cassette in its case and store vertically.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
WARNING: THIS APPARATUS MUST BE EARTHED.
This Time Lapse Video Cassette Recorder complies with the
requirements of the EC Directive 89/336/EEC, "EMC Directive"
and 73/23/EEC, "Low Voltage Directive", as amended by Direc-
tive 93/68/EEC. The requirements for the susceptibility accord-
ing to EN 50082-1 and the requirements for interference accord-
ing to EN 55022 are observed for the operation on residential
areas, business, light industrial premises and in small scale en-
terprises, inside as well as outside of the building. All places of
operation are characterised by their connection to the public low
voltage power supply system.
This unit is manufactured in accordance with EN60065.
1