Connector
5
BACK VIEW
• Turn the vehicle upright.
• Fit the handlebar steering column and connector down
through the large opening in the front end of the vehicle.
BOTTOM VIEW
6
• While holding the handlebar in place, carefully turn the
vehicle over. Check to be sure the steering column fits
through the hole in the steering linkage.
00989pr-1056
ASSEMBLY
Steering Column
Steering Column
Steering Column Cap
7
• Fit the steering column cap onto the end of the
steering column.
• Insert a #8 x
3
/
" (1,9 cm) screw through the large
4
opening in the steering column cap and into the hole
in the steering column. Tighten the screw.
Plate
8
• Slide the plate under the steering column, as shown.
• Insert a #8 x
3
/
" (1,9 cm) screw into the plate and tighten.
4
8