Display - Sharp PC-A500 Manual

Display

You can use an external monitor or LCD monitor with your computer. To display
images on both displays simultaneously, a resolution of no greater than 800 x 600 is
to be selected.
Some monitors, which are not compatible with your computer, may not
display correctly.
In this section, you often see the expression "Display Properties dialog
box." To open the dialog box, double-click My Computer - Control
Panel - Display.
Displaying the Screen on an External Monitor
4
You can display the screen on an external monitor.
1. In the Display Properties dialog box, select Settings; then, Advanced....
2. Select Monitor tab and click Change....
3. Click Next.
4. Select Display a list of all the drivers in a specific location, so you can select the
driver you want; then, click Next.
5. Select Show all hardware.
6. Select the manufacturer and the model, and click Next twice.
7. Close the dialog box, following the instructions on the screen.
Switching the Display
1. In the Display Properties dialog box, select Settings; then, Advanced ....
2. Select Display Device tab.
3. Select the device(s) in Display Device and click Apply.
4. If you see Warning Message dialog box, click OK.
5. If you see Warning Message dialog box, click OK within 15 seconds. Otherwise
the change is canceled.
Although you can switch the display with Fn+F5, use the above
procedure in normal use.
While playing video or animation, you may not be able to switch the
display.
4-4