Navigation System - Mazda 3 Smart Start Manual

Navigation System

TO REMOVE OR INSERT THE MAP SD CARD:
1 Turn the vehicle ignition OFF.
2 T he Navi SD card is located in the
center console.
3
Locate the sliding door (left) and slide it open (right).
• Remove card: Push the card once, then pull it out.
• Insert card: Push the card in (label-side up), then slide door closed (left).
NOTE:
•
V isit www.mazdausa.com/navigation within 60 days of vehicle delivery
and download the most recent map available for your device for free. In
order to download or upgrade your map, the TomTom Home software must
be downloaded. Please refer to the Navigation System Owners Manual
section of www.mazdausa.com/navigation for additional information.
•
Only use your MAP SD card for operating and updating your navigation system. Do not
insert the MAP SD card into another vehicle or into any other device such as a camera.
•
If your vehicle is not equipped with a factory navigation system, your audio system
can be upgraded to include navigation. Contact your Authorized Mazda Dealer for
more details.
PLANNING A ROUTE USING THE TOUCH-SCREEN
IMPORTANT: In the interest of safety and to reduce distractions while you
are driving, you should always plan a route before you start driving.
To plan a route on your Navigation system, do the following:
1 P ush the NAV button to access the Navigation System.
2 T ap the screen (above) to open the MAIN MENU (below).
27
Navigation System
NOTE:
is available if the vehicle is equipped
with the 5.8" LCD screen. Contact your
Authorized Mazda Dealer for more details.
3 T ouch Navigate to.
4 T ouch Address.
Factory Navigation System
SD Card