Control Components Control Components Desa Proflame units, LMFP33 and LDL39 series have two integral control components – the remote and the receiver unit.
Remote Control Remote Control Allows adjustment of BTU Allows adjustment of BTU output (flame height) output (flame height) Allows thermostatic Allows thermostatic operation of the heater. operation of the heater. Allows sleep timer Allows sleep timer operation in 15 minute operation in 15 minute intervals up to 90 minutes.
Page 4
Remote (cont.) Remote (cont.) BTU/Flame BTU/Flame height control height control Indicator Indicator Thermostatic Thermostatic Function Function Timer function Timer function...
Page 5
Remote (cont.) Remote (cont.) U ses th ree “A A A ” U ses th ree “A A A ” batteries. batteries. Programmable Programmable addresses to avoid addresses to avoid conflict with other conflict with other remote devices remote devices...
Page 6
Receiver Receiver Connects to gas valve Connects to gas valve stepper motor to stepper motor to control BTU output. control BTU output. Dip switches to control Dip switches to control address (must match address (must match with corresponding with corresponding remote).
Page 7
Receiver (cont.) Receiver (cont.) P ow ered b y fou r “A A ” P ow ered b y fou r “A A ” batteries. batteries. Beep codes to indicate Beep codes to indicate “w orki n g ” or “l ow “w orki n g ”...
Troubleshooting Troubleshooting If the remote does If the remote does not come on when not come on when the power button is the power button is pressed, replace pressed, replace the batteries. If the batteries. If the problem the problem persists, call 1 persists, call 1- - 866 866- -...
Page 9
Troubleshooting (cont.) Troubleshooting (cont.) IF the remote IF the remote appears to be appears to be working, but you get working, but you get no reaction from the no reaction from the heater: heater: 1) Check the 1) Check the batteries in the batteries in the receiver and replace...
Page 10
Troubleshooting (cont.) Troubleshooting (cont.) 2) Check the dip 2) Check the dip- - switch switch settings on the receiver: settings on the receiver: Locate the receiver in Locate the receiver in a. a. your heater. your heater. Remove the receiver and Remove the receiver and b.
Page 11
Troubleshooting (cont.) Troubleshooting (cont.) 3) Check the code in the 3) Check the code in the remote by: remote by: Move the indicator to Move the indicator to a. a. the timer using the the timer using the down button. down button.
Page 12
Troubleshooting (cont.) Troubleshooting (cont.) If everything seems If everything seems to be working and to be working and yet the unit still yet the unit still does not operate, does not operate, check the wiring check the wiring from the receiver to from the receiver to the valve.
Page 13
Troubleshooting (cont.) Troubleshooting (cont.) If th e rem ote i s sh o w i n g “A U X ” If th e rem ote i s sh o w i n g “A U X ” Move the indicator to the Move the indicator to the a.
Page 14
Troubleshooting (cont.) Troubleshooting (cont.) If the remote is in Celsius If the remote is in Celsius Move the indicator to Move the indicator to a. a. the timer using the the timer using the down button. down button. Press the minus Press the minus b.