Advertisement
Quick Links
Say What?!
This package includes (Style of push button and chime may vary from illus-
tration):
• Wireless chime
• Hardware pack
This chime requires 3 "C" alkaline batteries for the chime and 4 "AA"
alkaline batteries for the transmitter (Not Included). In typical use, alka-
line batteries will last up to six months.
1.
Install 4 type "AA" alkaline batteries in push button.
Open back of push button by removing screw at top of battery cover with
small philips-head screwdriver. Slide cover up and pull bottom of cover out to
remove. Remove demonstration batteries. Insert batteries according to mark-
ings inside push button. Reverse above procedures to reattach battery cover.
2.
Open back of case by removing 2 screws at bottom of battery cover with
small philips-head screwdriver. Press in catch on bottom of chime and re-
move cover. Insert batteries according to markings inside the chime. Re-
verse above procedures to reattach battery cover.
Keyhole
Jumpers
Tune
Selector
Battery Cover
© 2003 DESA Specialty Products™
™
• Wireless push button with demostration batteries
• Audio cable (Model 1204 Only)
Install 3 type "C" alkaline batteries in chime.
Audio Cable Jack
(Model 1204 Only)
Volume Control
(Not Shown)
C .
R E
Record Button
Screw
Model 1204 Shown
Wireless Chime
Jumpers
Record
Button
Keyhole
Battery
Cover
C .
R E
E N
O P
Audio Cable Jack
(Model 1204 Only)
598-1126-00
Screw
Advertisement
Related Manuals for Desa SAY WHAT?! 1204
Summary of Contents for Desa SAY WHAT?! 1204
- Page 1 Keyhole Jumpers Tune Selector Battery Cover © 2003 DESA Specialty Products™ ™ Wireless Chime • Wireless push button with demostration batteries • Audio cable (Model 1204 Only) Audio Cable Jack (Model 1204 Only)
- Page 2 Temporarily position chime and push button where you want them mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting . The chime is equipped with a High/Low switch located on the left side. Slide the switch to either High or Low to adjust volume.
-
Page 3: Code Settings
Code and Tune Settings Note: Most installations will not require you to change any jumpers on your chime and push button. This manual includes operating instructions for different types of chimes. All chimes work on the same principle and use the same channel setting infor- mation. - Page 4 Your wireless chime has different selectable tune modes: 4 prerecorded sounds and 1 setting that cycles through the 4 prerecorded sounds (model 1204 adds the ability to record up to 10 seconds of audio via the audio cable or built-in microphone, see instructions below). To select different tune modes, slide switch located on right side of chime to numbers 1 through 4 to select the prerecorded sound desired.
-
Page 5: Troubleshooting
Web site at: www.desatech.com. If the problem persists, call* for assis- tance at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to: DESA Specialty Products™ P.O. Box 90004, Bowling Green, KY 42102-9004 * If contacting Technical Service, please have the following information avail- able: Model Number, Date of Purchase, and Place of Purchase. -
Page 6: One-Year Limited Warranty
Retain receipt for warranty claims. DESA Specialty Products™ reserves the right to discontinue and to change specifications at any time without notice without incurring any obligation to incorporate new features in previously sold products.