Photography Mode; Capture Mode - Rollei RCP-7325XS User Manual

PHOTOGRAPHY MODE

[

] Capture Mode

Your camera is equipped with a 2.5" full color LTPS-TFT LCD monitor to help you
compose images, playback recorded images/video clips or adjust menu settings.
1. Press the POWER button to turn the power
on.
The status LED lights green and the
camera is initiated.
When the power is turned on, the camera
will start in the mode that was set.
If the power is turned on at [
mode, the lens will extend forward and it
is ready for shooting. At both modes, if
the mode switch is set to [
barrel will retract into the camera body
after 30 seconds.
If the power is turned on at [
the lens will remain closed.
2. Slide the mode switch to [
3. Compose your image in the LCD monitor.
Pressing the
subject, and enlarges the subject on the
LCD monitor.
Pressing the
angle image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter
button down fully captures the images.
The focus area frame turns blue when the
camera is in focus and the exposure is
calculated.
When the focus or exposure is not suitable,
the frame of the focus area turns yellow.
If the photographic preview is set to "On",
the captured image will be displayed while
the image is being recorded onto the SD
memory card.
] or [
], the lens
].
button zooms in on the
button provides a wider
]
] mode,
1
2
Press down halfway
Press down fully
EN-21