Adjust The Volume Balance (Part Balance Buttons) - Roland Music Atelier AT-10S Owner's Manual

Adjust the Volume Balance
The AT-10S allows you to adjust the volume balance individually for each Part.
fig.02-13
Big Band/ /
Swing
Accomp/ /
Reverb SMF
Fast / / Slow
Rotary Sound
Organ
Level
Full Jazz
Pipe Theater
The following buttons are used to adjust the volume of a multiple number of Parts.
Accomp/SMF [ ] [ ] buttons button:
Automatic Accompaniment (except bass)
Playback of performance data from something other than the Atelier
Rhythm performance
Pedal Level [ ] [ ] buttons:
Pedal Bass Voice, Bass part of Automatic Accompaniment
1.
The volume levels of each part are adjusted using the correspond-
ing Level [
When you press the up button (
ton (
The volume can be set to any value from 0 to 12.
When you press the Level [
the display.
fig.02-14
NOTE
When the volume value shown in the display is 0, that part will produce no sound.
Rhythm
Country/ / Contempo/ / Waltz/ /
Oldies Ballad Latin March
Standard
To Variation
Tempo Fill In
Upper
Orchestral
Level
Strings Piano Brass
Sax Flute
] and [
), the volume decreases.
(Part Balance Buttons)
One Touch
Trad/ /
Program
Acoustic
Intro/ / Start / /
To Original Ending Stop
] buttons.
), the volume increases; when you press the down but-
][ ] buttons, the volume for each part will be shown in
Start Playing the AT-10S
Pedal Lower
Level
Organ Lower Strings
String
Pipe Choir
Level
Piano
Brass
23