Elite series b-vent gas fireplace heater inserts (20 pages)
Summary of Contents for Lennox Hearth Products WINSLOW PI40
Page 1
Manual.” PURCHASING THE CORRECT FUEL FOR THE FIREPLACE INSERT The Winslow PI40 pellet fireplace insert has been designed to burn wood pellets. We recommend burning Premium Grade wood pellet fuel manufactured by companies who are members of the Pellet Fuels Institute (PFI). Although similar in appearance to those made of wood, other pelletized fuels such as wheat, barley, cherry pits, etc.
High If the flame goes out, press the “Start” button to Start re-ignite the stove Igniting Ready Feeding STOPPING THE WINSLOW PI40 PELLET INSERT High Start Control Fuse Ignitor Fuse Turn the control board dial to the “OFF” position High...
DAMPER ADJUSTMENT The Winslow™ PI40 pellet fireplace insert is equipped with a damper adjustment which is used to fine tune com- bustion. Although every unit is test burned and calibrated at the factory, periodic adjustment may be necessary at times to compensate for variables such as fuel, venting, climate, altitude, and maintenance intervals. OPENING THE DAMPER Opening the damper increases the amount of combustion air.
Page 4
CLEANING AND MAINTENANCE SCHEDULE (CONTINUED) In addition to the regular maintenance procedures described below, the “Installation and Operation Manual” out- lines yearly service that should be performed by a qualified technician. Burn Pot Heat Exchanger The burn pot should be checked Keeping the heat exchanger for clinkers prior to operating tubes clean will maximize...