Call Forwarding; Using Variable Call Forwarding - Siemens HIPATH 3000 Operating Instructions Manual

Call Forwarding

Step by Step
Forwarding o n?
1=all calls?
2=external calls only?
3=in ternal calls on ly?
:
or
US: Save?
UK: Save en try?
Forwarding o ff?
62
Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to
d ifferent internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
Select and confirm.
or
F:
Enter the code.
Select and confirm.
or
or
or
; <
or Enter the code.
D
Enter the number of the telephone that is ringing .
Confirm.
Deactivating call forwarding:
Select and confirm.
or
G:
Enter the code.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 92!
When call forwarding is active, a special d ial tone
sounds when you lift the handset.
If DID DTMF is active (contact System Suppor t),
you can also forward calls to this destination.
Destinations: fax = 870, DID = 871,
fax DID = 872.