Controlling Relays; Sensors (Hipath 3300/3350/3500/3550 Only) - Siemens HIPATH 3000 Operating Instructions Manual

Using Other Functions
Step by Step
*90=Control Relay On ?
#90=Control Relay Off?
FB9
or
76

Controlling Relays

If this function has been configured (contact System
Support), you can turn up to four relays on and off to
control different facilities (such as a door opener).
Depending on how they are programmed , you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
Select and confirm.
or
or
GB9
Enter the code for "on" or "off".
: =
... Enter the relay.
Sensors (HiPath 3300/3350/3500/3550
Only)
If this function has been configured (contact System
Support), sensors detect signals, causing your phone to
ring and a message to appear on your screen.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 95!