Introduction; System Requirements - Seagate Momentus 5400 FDE.3 SATA Product Manual

1.0

Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate
®
Momentus 5400 FDE.3 SATA model drives:
ST9320322AS
ST9160312AS
ST9120312AS
These drives provide the following key features:
• DriveTrust technology including:
• Hardware-based Full Disc Encryption (FDE)
• DriveTrust security interface and ATA security interface
• Integrates with standard security software packages to provide features such as: Pre-boot authentica-
tion and initialization using the drive's secure partition and DriveTrust API
• 5,400-RPM spindle speed
• 8-Mbyte buffer
• Quiet operation. Fluid Dynamic Bearing (FDB) motor.
• High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 6.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Full-track multiple-sector transfer capability without local processor intervention.
• 1,000 Gs nonoperating shock and 350 Gs operating shock.
• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Support for Read Multiple and Write Multiple commands.
1.1

System requirements

The following hardware and software is required to use these drives.
Host system requirements:
• Windows XP with Service Pack 2 (or later) when utilizing the Windows DriveTrust API.
• System/BIOS that supports ATA Security commands.
Momentus 5400 FDE.3 SATA Product Manual, Rev. A 1