Seagate Medalist 8421 Installation Manual page 12

8 Medalist 8421, 6421, 4311 and 2112, Rev. A
Interface
connector
Figure 4. Cable connectors
Caution. To avoid possible damage to the drive, do not
!
overtighten the screws or use metric screws.
Note. If you are mounting the drive in a 5.25-inch drive bay, you
need a mounting adapter or frame kit. Contact your com-
puter dealer. Some computers also require drive mount-
ing rails, which can usually be obtained from your dealer.
5. Attach a power cable to the drive. If your computer does not have
an unused power connector, you can purchase a Y-shaped
power cable from your computer dealer.
6. Check all cable connections and then replace your computer
cover. Continue to "Configuring Your Computer."
Power
connector
Pin 1