Seagate HAWK 4 Famil Installation Manual page 4

2 Hawk 4 (Wide) Family Install Guide, Rev. A
___________________________________________
The physical design characteristics of the drive(s)
described herein, serve to minimize EMI radiation
when installed in an enclosure that provides reason-
able shielding. As such, the drive(s) are capable of
meeting the Class B limits of the FCC Rules and the
Regulations of the Canadian Department of Communi-
cations.
Note. It is the end users' responsibility to assure that
the drive(s) described herein meet the appro-
priate EMI requirements of their system. Shielded
I/O cables may be required if the enclosure does
not provide adequate shielding. If I/O cables are
external to the enclosure, shielded cables should
be used, with the shields grounded to the enclo-
sure and to the host controller.