Seagate DB35.3 Series Serial ATA Product Manual page 17

Drive specification
Vibration, nonoperating
Drive acoustics, sound power
Idle**
CE seek profile
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
(25°C, 50% rel. humidity)
Supports Hotplug operation per Serial ATA Revision 2.5
specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
DB35.3 Series Serial ATA Product Manual, Rev. D
ST3250820SCE
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 5.0 Gs
350–500 Hz:: 1.0 Gs
2.5 bels (typical)
2.7 bels (max)
2.8 bels (typical)
2.9 bels (max)
14
1 per 10 bits read
0.68%
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to
access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be
asked to provide the drive serial number, model number (or part num-
ber) and country of purchase. The system will display the warranty
information for your drive.
50,000
Yes
11