LG Zenith HCS5610 Installation And Operating Manual page 27

Clock Setup (Continued)
Automatic Time Settings
- If you select auto time setting, time will be set from the digital
broadcast information.
Press the MENU button and then use the ADJ
1
to highlight the Setup menu and press the OK (Enter)
button.
Use the ADJ
D
2
Press the OK (Enter) button to highlight Clock. Manual or
3
Auto will appear on the menu next to clock. Select Auto on
the sub-menu with the ADJ
(Enter) button.
Use the ADJ
D E F G
4
and Time Zone options for your local area.
See the next page.
When finished, press MENU repeatedly to remove the menus.
5
Caution: Some digital channels may change the time
incorrectly using the Automatic Clock Set feature.
In this event, the Alarm may not function as intended and
the TV may not turn on at the expected time.
If the end user will have access to the Alarm, it may be best
to use the Manual Clock Set mode and set the clock to local
time manually.
Mini glossary
TIME A four-digit figure broken down into hours and minutes, used to enter the current time when setting the clock or wake-up alarm.
HOURS First two digits that are entered when setting the clock or the wake-up alarm.
MINUTES The last two digits that are entered when setting the clock, or the wake-up alarm.
or button to the Time.
E
or button and press the OK
D E
buttons to set the Daylight Savings
or button
D E
--. -- ----
--. -- ----
--. -- ----
Time
V-Chip
Menu Language English
Menu Transparency Semi Opaque
Set ID 1
--:-- --
D E
Move OK Select
Clock Manual
Manual Clock
Daylight Saving
Time Zone
On Timer
Off Timer
Auto Off Off
--:-- --
D E
Move OK Select
Clock
Manual Clock
Daylight Saving
Time Zone
On Timer
Off Timer
Auto Off
--:-- --
D E
Select MENU Back
G
MENU Back
G
MENU Back
Auto
Manual
P A G E 2 7