Stringbox Parameters; Chorus; Decay Envelope; Delay Mode - Lexicon PCM NATIVE EFFECTS BUNDLE Owner's Manual

Harman with the pcm native effects bundle

Table of Contents

Content Checked

Stringbox Parameters

Controls the amount of detuning in each course of strings.

Controls how the note rings after a key is deselected. Open means that the note will ring until it

dies away. The Damped settings causes it to die more quickly.

Determines whether the predelay uses an absolute value (milliseconds) or a note value related

to the tempo of the mix.

This region shows which keys of the virtual piano have been pressed, indicating which pitches

will be resonated. If the Note Selection parameter has been set to Keyboard, then notes may

be selected by clicking on keys.

This parameter controls the target brightness of strings in each of four zones. This is the

brightness of the string as it reaches the end of its decay. Lower brightness means that the

string becomes duller as it decays. This may be adjusted by selecting the blue tab and then

shaping the blue line above the keyboard.

This parameter controls the decay time in each of four zones. This may be adjusted by selecting

the red tab and then shaping the red line above the keyboard.

This parameter controls the level of strings in each of four zones. This may be adjusted by

selecting the green tab and then shaping the green line above the keyboard.

Table of Contents