The Soft Row; Customizing The Soft Row - Lexicon PCM NATIVE EFFECTS BUNDLE Owner's Manual

Harman with the pcm native effects bundle
Table of Contents

Advertisement

The Soft Row

When the plug-in is first instantiated, a number of parameters appear. This page of parameters
is called the "Soft Row". These parameters were chosen as being the most useful parameters
for a particular preset. In most cases, we've tried to make a consistent set of choices, but many
presets call for different parameters. For most people, the soft row is all that's needed.

Customizing the Soft Row

The Soft Row assignments are part of the preset. You can change the Soft Row assignments
and store the preset as a User preset. To do this, press the "Edit" key to go into edit mode and
press the button for "Soft Row". The plug-in will look something like this:
In the modifier button area, just above the fader, you will see the name of the parameter that is
assigned to that position in the soft row. Clicking on any of these parameter buttons reveals a
list of all the algorithm's parameters. Select a parameter (or "no selection") from the list, and
that parameter is then assigned to the soft row. The assigned parameter is still available on its
original edit page, but now it appears in the soft row as well.
You can assign any parameter to the soft row. You can even assign the same parameter more
than once. When you're done, store it as a User Preset and you'll always be able to recall the
preset with your customized soft row.
10
2. Click
Soft Row
1. Click
Edit
3. Modifier
button area.
Click to assign
soft row
parameter.

Advertisement

Table of Contents
loading

Table of Contents