Grounding And Ac Power Cord Connections; Features - Schumacher Electric SWI-1224 Owner's Manual

8.

GROUNDING AND AC POWER CORD CONNECTIONS

8.1 This battery charger is for use on either a nominal 120V, 50/60 Hz or a nominal 230V,
50/60 Hz circuit. (See the warning label on the charger for the correct input voltage.)
The charger must be grounded to reduce the risk of electric shock. The plug must be
plugged into an outlet that is properly installed and grounded in accordance with all local
codes and ordinances. The plug pins must fit the receptacle (outlet). Do not use with an
ungrounded system.
8.2
have a proper grounded outlet installed by a qualified electrician. An improper
connection can result in a risk of an electric shock or electrocution.
8.3 If the AC cord is damaged, it must be replaced by the manufacturer, its service agent or
other qualified person in order to avoid a risk of personal injury or property damage.
8.4 Recommended minimum AWG size for extension cord:
• 100 feet (30.5 meters) long or less - use a 12 gauge (4mm
• Over 100 feet (30.5 meters) long - use a 10 gauge (6mm
9.

FEATURES

RISK OF ELECTRIC SHOCK OR FIRE.
Never alter the AC cord or plug provided – if it does not fit the outlet,
3
2
1
1. Ammeter
2. Timer
3. Charge Rate Switch
4. Battery clips
4
• 36 •
) extension cord.
2
) extension cord.
2