Advertisement
Seat Back
Holes
13
•
At an angle, fit the pegs on each side of the seat back into the
holes in the sides of the seat bottom.
Hint: You may need to flex the bottom edge of the seat back to fit
the seat back pegs into the holes in the seat bottom.
14
•
Lift the seat back latch and push the seat back forward.
Assembly
Peg
15
•
Insert two M4 x 17mm screws into the seat back and tighten.
Seat Bracket
16
•
Fit a seat bracket to the side of the seat bottom, as shown.
•
Insert two M4 x 17 mm screws and tighten.
7
M4 x 17mm
Screws
M4 x 17mm
Screws
Advertisement
